|
Post by ahmednh on Feb 4, 2019 20:26:20 GMT 1
I have done the required in autoexec.bat
Call vdoc\dbase\dbase
and in the debase.exe under property program: I have put the path correctly, the program runs and open the blank debase dashboard but with no files
I do not know how to call all my applications files on one click
Kindly help me resolve this issue
thanks
|
|
|
Post by Jos on Feb 4, 2019 20:41:06 GMT 1
At the vDos command prompt, test if the set path is indeed correct.
Jos
|
|
|
Post by ahmednh on Feb 4, 2019 21:05:53 GMT 1
I try it opens only the dbase IV Control center
catalog c:\untitled.cat
but no files called into the progrom
|
|
|
Post by Jos on Feb 4, 2019 21:15:00 GMT 1
At the vDos command prompt, test if the set path is indeed correct.
Jos
|
|
|
Post by ahmednh on Feb 4, 2019 21:27:28 GMT 1
in Vdos command:-
C:\> cd\dbase
C:\dbase>dbase
it runs perfectly but no files shown only the blank blue menu
catalog not called in
|
|
|
Post by Jos on Feb 4, 2019 22:05:34 GMT 1
Perhaps Menu: Catalog - Add file to catalog
Jos
|
|
|
Post by ahmednh on Feb 4, 2019 22:17:09 GMT 1
I have done that and added files but when running any program can not call the dbf file even it is in the catalog
I am very surprised what steps I am missing
|
|
|
Post by Jos on Feb 4, 2019 22:24:30 GMT 1
Probably the directory structure in vDos doesn’t match that of your old system.
Eventually start vDos with the /log option (“….\vDos.exe” /log). Then have a look at the created vDos.log file what your programs try, but fail, to open.
Jos
|
|
|
Post by ahmednh on Feb 4, 2019 22:39:07 GMT 1
I will Test tomorrow as it is late here and I will report tomorrow
Thanks Jos
|
|
|
Post by ahmednh on Feb 5, 2019 15:22:24 GMT 1
this what came from log file
vDos 2018.05.01 0.12 C: => (Local) C:\vDos\
Execute: Dbase\dbase.EXE Int 15 unhandled call BFDE Int 2F unhandled call 1687 Int 15 unhandled call BF01 0.14 Int 15 => 39e:13c8 0.23 OpenFile failed: DBASE.VMC(2) => C:\vDos\DBASE.VMC 0.32 OpenFile failed: DBASE1.RES(2) => C:\vDos\DBASE1.RES OpenFile failed: CONFIG.DB(2) => C:\vDos\CONFIG.DB Int 2F unhandled call 1600 1.13 Delayed logging, set w/o DOS call: Int 9 => 845:01ef Int 15 => 59e:13c8 Int 1B => 59e:1254 Int 22 => f000:0003 Int 23 => 59e:1274 Int 24 => 59e:1278 2.29 Int 21 unhandled call DC24 DOS:IOCTL Call E0 unhandled OpenFile failed: DBASE\DBSYSTEM.DB(2) => C:\vDos\DBASE\DBSYSTEM.DB OpenFile failed: DBSYSTEM.DB(2) => C:\vDos\DBSYSTEM.DB OpenFile failed: DBASE\DBSYSTEM.DB(2) => C:\vDos\DBASE\DBSYSTEM.DB Record locking verified for DOS C: OpenFile failed: DBASE\TMP89412.$DB(2) => C:\vDos\DBASE\TMP89412.$DB OpenFile failed: MY-PC.LOG(2) => C:\vDos\MY-PC.LOG OpenFile failed: MY-PC(2) => C:\vDos\MY-PC 3.16 Delayed logging, set w/o DOS call: Int 1C => 59e:1258 8.23 Idle 9.67 Idle end 10.70 Idle 11.07 Idle end 11.09 Int 15 => original 11.27 Delayed logging, set w/o DOS call: Int 9 => original Int 1B => original Int 1C => original Int 23 => original Int 24 => original 15.60 vDos ended by EXIT (0)
|
|
|
Post by ahmednh on Feb 5, 2019 15:23:21 GMT 1
which could not figure the problem
|
|
|
Post by Jos on Feb 5, 2019 15:57:40 GMT 1
What when you try to run one of your problematic programs?
Jos
|
|
|
Post by ahmednh on Feb 5, 2019 16:20:28 GMT 1
always message come
staff.dbf not found
actully the dbf and other program files present under the working folder
|
|
|
Post by ahmednh on Feb 5, 2019 16:21:51 GMT 1
the folder same as the dptest under dbase folder
|
|
|
Post by Jos on Feb 5, 2019 16:37:00 GMT 1
What about the vDos.log file when you ran that program and those messages appeared.
Jos
|
|