|
Post by emiliano on Dec 19, 2019 19:58:09 GMT 1
Hola, queria consultar a la hora de imprimir logre reducir el tamaño para que ingresen todas las columnas, pero no me imprime bien los renglones.. vi que cada 44 renglones corta y hace un salto de pagina. Espero una respuesta. Saludos.
|
|
|
Post by Jos on Dec 19, 2019 20:06:42 GMT 1
Can you submit your #lptx.asc and config.txt file to check?
Jos
|
|
|
Post by emiliano on Dec 19, 2019 20:36:29 GMT 1
no se a que te referis con #lptx.asc
|
|
|
Post by emiliano on Dec 19, 2019 20:38:46 GMT 1
EN MI CONFIG LO TENGO CONFIGURADO ASI, EN DONDE LAS COLUMNAS Y LA LETRA SALEN PERFECTA, PERO COMO TE DIJE ANTES, ME HACE SALTO DE PAGINA A MITAD DE HOJA, CONTANDO UN TOTAL DE 44 RENGLONES.
REM Printing REM ======== LPT1 = SEL:"HP10.10" horz:5,10,110 rem LPT<1..9> and COM<1..9> are available for printing. rem Printer output is collected as a printjob, it is considered to be finished if the DOS application doesn't send any data for some time. rem If you experience problems with printing (broken pages) or like the printer to respond quicker. You can try if disabling this mechanism will help: rem TIMEOUT = OFF
Si no ahi alguna solcuion no hay drama. Es solo una consulta
|
|
|
Post by Jos on Dec 19, 2019 20:44:24 GMT 1
There should be a #lpt1.asc file in the vDos directory (the x stood for the port number).
Jos
|
|
|
Post by emiliano on Dec 19, 2019 20:52:01 GMT 1
el contenido del LPT1.ASC es lo ultimo que imprimio, es decir lo que mande a imprimir me lo saco en 5 hojas.. y los renglones de la ultima hoja es el contenido de ese archivo.
|
|
|
Post by Jos on Dec 19, 2019 20:56:02 GMT 1
Change the line in config.txt to: LPT1 = SEL:"HP10.10" horz:5,10,110 TIO:0
If that doesn't work, nothing is printed, or only when the program is ended: LPT1 = SEL:"HP10.10" horz:5,10,110 TIO:10
Jos
|
|
|
Post by emiliano on Dec 19, 2019 21:04:12 GMT 1
Al querer ejecutar el sistema no lo abre y mne dice item invalido LPT1 = SEL:"HP10.10" horz:5,10,110 TIO:0
|
|
|
Post by Jos on Dec 19, 2019 21:14:48 GMT 1
Use the latest (2019.05.01) version of vDos.
Jos
|
|
|
Post by emiliano on Dec 19, 2019 21:26:09 GMT 1
Disculpa, estaba con una pc vieja.. ahora lo pude ejecutar, pero sale exactamente igual.
|
|
|
Post by Jos on Dec 19, 2019 21:35:48 GMT 1
Check you’re actually using that modified config.txt with TIO:0.
If TIO:0 is in effect, and you get still broken pages, your program would 5 times close (and reopen) the LPT1 device while printing a report. Doesn’t seem logical, but if this is the case, the only last resort at this moment would be using SPOOL (see Printing.pdf).
Jos
|
|
|
Post by emiliano on Dec 19, 2019 22:13:35 GMT 1
Excelente.. ahora imprime bien con TIO:0, pero imprime una vez que salgo del sistema. Pero en fin, imprime bien. Muchas gracias
|
|
|
Post by Jos on Dec 19, 2019 23:16:04 GMT 1
If TIO:0 causes your program to only print as it ends, it won’t use the Open-Write-Close DOS device sequence. The next version will have more TIO options, for now you probably could better still try TIO:10.
Jos
|
|