|
|
Post by Dipak Sheth on Jul 10, 2022 7:48:33 GMT 1
vdos 220.05.01 version ------------------ config.txt WINDOW = 34,61:30 LPT1 = HORZ: 10,50 ------------------ Autoexec.txt use d: d:\dw D: ----------- OS : windows pro 10 64 bit Printer to Pdf ( Mircrosoft Print to PDF) When I print from windows 10 64 bit problem 1: BLANK PAGE inserted before printing Problem 2 : ( DATA WORLD) should is bold and enlarge mode ("D" NOT PRINTING and it is in normal printing effect) Problem 3 : (Profit and loss) line should on next line (it is printing with "data world" same line ) Problem 4 : after printing Page 1 again print BLANK PAGE. then print START 2 page. Attaching #lpt1.asc Files (due attachment limit over not attached #lpt1.txt) Attaching (winodws 7 32 bit ok with dos2usb utility software WITHOUT vdos ) and wrong print out (windows 10 64 bit vDos ) two pdf files. please guide how to set extra printing command in config or autoexec files regards from Dipak Sheth (dipaksheth@hotmail.com) |
|
|
|
Post by Jos on Jul 10, 2022 20:55:30 GMT 1
A BIG sigh at first: Will have to go into debugging why some ESC-P commands seemingly aren’t handled correctly. I fed _lpt1.asc to my vDos development version, at the command line: COPY _lpt1.asc LPT1. Surprise, using NovaPDF that gave attached PDF document. Had a look at my config.txt: A mere "lpt1 = tio:0". Then tried vDos 2022.05.01, same result. Also with "Microsoft Print to PDF". Could you download and install 2022.05.01 again. Some changes were made to the first release. Though not related to printing, strange… Jos Attachments:vDos.pdf (24.97 KB)
|
|
|
|
Post by Dipak Sheth on Jul 12, 2022 9:15:06 GMT 1
dear sir thanks for answers I had re-install the vDos software with Nova-pdf printer. same my dos application is working since 25 year more with DMP printer and USB laser printer and INKjet printer. new config.txt code as you sugested is below. WINDOW = 34,61:30 LPT1 = tio:0 check attached pdf files. the same software is working perfectly with my client computer. but is giving some problem with my laptop. Attachments:vDos - Initial test.pdf (14.44 KB)
|
|
|
|
Post by Jos on Jul 12, 2022 9:41:08 GMT 1
I did my first tests with NovaPDF since it is my default printer. And said I got the same result selecting "Microsoft Print to PDF".
If you don’t need the extended functionalities (and so user complexity) of NovaPDF, I advise to use the freeware BullZip PDF Printer.
The mentioned LPT1 setting just happened to be active in my config.txt, with 25 others (to test settings) remmed-out.
The printout is only incorrect with your laptop? Check the settings/selection in the program to control the printer. Those will differ from the clients PC.
Jos
|
|
|
|
Post by Dipak Sheth on Jul 12, 2022 13:26:03 GMT 1
i have try to take printing on another laptop where is working perfect
could not find out what is the difference in printing setup.
then i use WINPRINT 1.5 printing utility then it working fine.
if possible to trace with out third party utility it will great,
in future if you find out or i will get solution i will update.
Regards and thanks.
|
|
|
|
Post by Jos on Jul 12, 2022 14:11:02 GMT 1
I explained the issue, nothing to find out for me.
Have a look at the vDos lpt1.asc files of the two laptops: They’ll differ because the program sends different data to the printer at each laptop.
Jos
|
|
