|
Post by roy on Aug 4, 2022 13:15:08 GMT 1
Dear All Master,
I created my own application to do print and I tried individually to do a print of my application by taking the "#LPT1. ASC" the process is directly print
and if I do via vdos by doing config as follows "LPT1 = "testrawprinting.exe" the print result takes 10 seconds so I think it's slow. Is there anything I set in the Vdos app?.
Please solution.
Thanks
|
|
|
Post by Jos on Aug 4, 2022 13:50:10 GMT 1
Have a look in at the TIO: option (Printing.pdf). A 10 second delay will however mostly be due to the DOS program.
Jos
|
|
|
Post by roy on Aug 4, 2022 14:24:25 GMT 1
Dear Mr. Jos,
I do via vdos by doing config as follows "LPT1 = "testrawprinting.exe" TIO:1
Is it true that I have to set it up like that
thanks
|
|
|
Post by Jos on Aug 4, 2022 14:51:39 GMT 1
If your DOS program doesn’t then produce broken pages, that would be an option.
But even if the program doesn’t send a final formfeed, the speed gain would be at most 4 seconds. Else you can better omit this option.
As said, most of the waiting time, if not all but 1 second, will be due to your program composing the output.
Jos
|
|